Home Forums Other Technical Discussions How to remove door panels?

Viewing 6 posts - 1 through 6 (of 6 total)

How to remove door panels?

  • Author
    Posts
  • NicholaswjNicholas Johnson
    Participant
    Post count: 13
    #12544 |

    Does anyone have any tips or tricks for how to remove the door panels?

    The speaker grills also have me worried I’ll break them, what’s the trick to getting those off?  I saw two screws after removing the small plastic piece coving them.

    I know there are two screws also under the arm rest, and that you have to remove the door opening handle, window switches, and red light cover.

    I’m must be missing something.

    Thanks!

    GuillaumeC Guillaume
    Participant
    Post count: 51

    Hi!

    Here is the documentation:

     

    In english:

    • Dismantling (to disassemble)
      • The handle (2 screws)
      • Grids speaker + speaker
      • 2 clips at the lower edge of the panel
      • 2 screws under the opening door handle
      • The plastic button on the opening door handle
      • While the door panel (remove and drag upwards)
      • The electrical connections
      • Strengthening door opening handle panel
    • Reassembly (to plug)
      • The electrical connections
      • The door panel (suspended by the upper edge)
      • 2 clips at the lower edge of the panel
      • 2 screws under the opening door handle
      • Speaker + Grids speaker
      • The handle
      • Strengthening around the door opening handle
      • The plastic button on the opening door handle

     

    GuillaumeC Guillaume
    Participant
    Post count: 51

    And with the numbers:

    NicholaswjNicholas Johnson
    Participant
    Post count: 13

    Thank you thank you thank you!!!

    Do you by chance have a .pdf copy of this manual?

    GuillaumeC Guillaume
    Participant
    Post count: 51

    🙂

    Not yet, I must scan this manual!

    DaviesDavies
    Participant
    Post count: 102

    Be careful pulling the plastic speaker covers off. The small cover that exposes the screws has to be pulled at the right angle or it will break the tabs. The same thing for the speaker cover, which has a hook shaped clip.  The drawings are very helpful!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.