Home Forums Other Technical Discussions Door panels – installing the sealing strip

Viewing 3 posts - 1 through 3 (of 3 total)

Door panels – installing the sealing strip

  • Author
    Posts
  • LagerLager
    Participant
    Post count: 82
    #12850 |

    Hi!

    I´m restoring the door panels and right now I´m installing the new sealing strips. I mean the strips that are grey or beige and go around the panels. Here is the picture that shows the strip. It is the number 18 in the picture . The problem is that it seems that you have to use some kind of glue to keep them in place. I don´t know whta kind of glue to use. It should be something that won´t dry – stays sticky but is not too messy either.

    Strips

    DaviesDavies
    Participant
    Post count: 102

    I’m familiar with that problem. I would think a clear silicon or even a weather strip adhesive (3M makes a good one) would be fine. Since you are just using it to hold it on, I would think a think layer is more than sufficient.

    LagerLager
    Participant
    Post count: 82

    Hi!

    I have to try that 3M stuff. I think that it would be a great stuff to glue the sunroof seal too.

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.