Home › Forums › Other Technical Discussions › How to reset SRS/Airbag indicator? › Reply To: How to reset SRS/Airbag indicator?
2016-08-31 at 22:04
Post count: 183
I seem to recall it has to be grounded to be cleared. Here is what I found on Brickboard.com
“A common problem is corrosion of the contacts on the yellow or orange power connector for the crash sensor under the carpet on the transmission tunnel. If the procedure to reset the fault codes doesn’t work, make sure the contacts are clean and then try to clear the codes again. If the SRS light comes back on, the problem is probably another component or even low battery voltage. Faults must be cleared for the light to go out.”